Meyer Burger Technology AG nach Fusion mit 3S

Seite 17 von 210
neuester Beitrag: 26.03.24 17:05
eröffnet am: 19.01.10 11:52 von: Palaimon Anzahl Beiträge: 5232
neuester Beitrag: 26.03.24 17:05 von: Highländer49 Leser gesamt: 2335889
davon Heute: 248
bewertet mit 33 Sternen

Seite: 1 | ... | 14 | 15 | 16 |
| 18 | 19 | 20 | ... | 210   

07.04.16 10:17
3

80 Postings, 3088 Tage ricardo_rsGuten Morgen

Grundsätzlich ist die Geschichte von MB schon tragisch.
Nichts desto trotz, der Kleinauftrag von heute setzt
für mich auch ein Zeichen aus der richtigen Richtung - Asien.
Bin mal mit einer kleinen Posi eingestiegen,
in der Hoffnung, dass da bald noch mehr Kleinaufträge
reinflattern, auch aus Westen.

 

07.04.16 10:39
2

17831 Postings, 4184 Tage H731400@ricardo

Wer soll denn aus dem Westen bestellen ? Wen gibt es da ?  

10.04.16 00:17
3

94 Postings, 3616 Tage driftyHier ein Beispiel:

In June 2014, SolarCity announced plans to build a new manufacturing facility in Buffalo, New York, in coordination with the SUNY Polytechnic Institute after acquiring Silevo, a maker of high-efficiency solar modules. With a planned capacity of one gigawatt of solar panels annually, the new plant would be the largest solar plant in the U.S. and would compete head-to-head with Chinese manufacturers. Groundbreaking for the project occurred in September 2014 with a target completion date of early 2016.

The facility is expected to be the largest of its kind in the Western Hemisphere.


Das wäre eigentlich eine "Opportunity"......

 

10.04.16 11:05
3

17831 Postings, 4184 Tage H731400@drifty

Google mal, die Hersteller kommen aus Japan, Taiwan und Singulus. Es gab mehrere Bericht zu der Buffalo Fabrik in New York.  

10.04.16 11:07
4

17831 Postings, 4184 Tage H731400Info dazu

SolarCity’s 1GW Buffalo fab using technology from Japan, Germany and Taiwan

Apr 08, 2016 1:28 PM BST  0
Share
By Mark Osborne, Senior News Editor

Mark Osborne

Mark Osborne has nearly three decades of experience in covering both the semiconductor and photovoltaics manufacturing industries. In his current roles as senior news editor for PV Tech and sister technical journal, Photovoltaics International, Mark covers the key developments in the PV industry on a global level and continues to provide insight and analysis via his editor's blog.

SolarCity’s 1GW Buffalo fab using technology from Japan, Germany and Taiwan
Ever since the 1GW production plans were announced back in July, 2014 speculation has remained over the tool selection. Indeed, no conference or exhibition that PV Tech had attended since that time, did the subject of tool selection not arise with industry people.

In February, 2016 SolarCity, the largest residential solar PV installer in the US said in its fourth quarter 2015 earnings call that its ambitious 1GW Buffalo Riverbend manufacturing facility had been impacted by longer than expected equipment lead times, pushing some equipment installs into the second-half of 2016.

However, much of the equipment set to produce its hybrid heterojunction cell and module technology from its acquisition of start-up Silevo remained a mystery.

We previously noted in October, 2015 that silence over what could have been around a US$400 million to US$450 million earnings bonanza for hard-hit PV equipment suppliers continued, despite the Buffalo facility nearing construction completion.

Ever since the 1GW production plans were announced back in July, 2014 speculation has remained over the tool selection. Indeed, no conference or exhibition that PV Tech had attended since that time, did the subject of tool selection not arise with industry people.

In contrast to the regular intensity of PR from SolarCity, the company has chosen the stealth mode over the equipment orders. However, what became known was that a number of major equipment orders had been placed in early 2015 with suppliers based in Japan, Taiwan and Germany.

PV Tech had previously highlighted that turnkey back-end module assembly equipment supplier NPC Group, based in Japan had been Silevo’s vender of choice at its 100MW pilot line that was relocated from China to Silicon Valley and indeed, NPC is believed to be the vender of choice for the Buffalo fab, according to analysis of its financial filings.

However, the biggest interest was in the front-end processing equipment as Silevo’s hybrid-heterojunction cell architecture relies heavily on thin-film processes such as PVD (Physical Vapour Deposition) and copper electroplating, all advanced next generation technologies that enable high-efficiencies and low cost production. It is also where the majority of capital expenditure would be allocated.

One of the challenges in identifying the suppliers was the dependence on thin-film processes as the majority of suppliers have little exposure to the PV industry and primarily service the FPD (Flat Panel Display) and semiconductor industries.

A process of elimination only got us so far in the search, though any key involvement by the PV industry’s leading PECVD suppliers to p-type lines was ruled out based on lack of tool orders coming from the US.

According to PV Tech’s analysis, German-based equipment specialist Singulus Technologies is one of the key front-end suppliers to the Buffalo fab, possibly supplying its modular SILEX II wet processing batch system for n-type monocrystalline wafer texturing and its HISTARIS inline sputtering system for anti-reflection, barrier, buffer and precursor layers.

A stumbling block did exist in identifying the a-Si (PECVD) deposition tool supplier, until by accident we stumbled across Taiwan-based firm, Archers Systems.

In a February, 2016 press release, believed to be related to a new order from Taiwan-based solar cell producer, Neo Solar Power (NSP), Archers makes clear reference to the "US largest rooftop solar PV provider" and its "1GW HJT solar cell production capacity", which noted that it had "successfully delivered and received the final acceptance for the equipment ordered by this client in 2015".

There still remains some uncertainty over whether we have got these supplier selections right as on purpose they were not contacted as they would surely be under NDA agreements. There also remains some uncertainty in regards to some other tool selections but the picture is emerging.

Clearly, some of the key pilot line suppliers to Silevo have benefited from follow-on volume production orders, which although comes across as an obvious move, it highlights that processes from what looks increasingly like a successful pilot line project to the fab should have a higher repeatability factor and a better chance of a successful production ramp.

Ramp schedule

Since the Buffalo fab was announced we were of the opinion that SolarCity/Silevo would be totally mad to try and ramp all 1GW of production lines at once.

Instead, the logical assumption was that the plant would be ramped in phases, such as 200MW to 500MW sized ramps. Only recently, key information garnered indicated that the company was indeed attempting to ramp all 1GW of production lines at once.

The news back in February, 2016 that longer than expected equipment lead times than originally expected would impact the overall production ramp schedules, coupled to a knock-on effect of allowing a delay in the purchase of an unidentified amount of the equipment until some time in 2017, could have been a bit of a red herring.

Plans to start ramping production in the second-half of 2016 look highly likely, based on recent findings. Should this prove real, SolarCity and Silevo as well as New York state and the State University of New York's College of Nanoscale Science and Engineering, which would own the buildings and equipment, would garner significant kudos and allay significant concerns over the planned execution.

Tags: c-si manufacturing, pv modules, solar cell, heterojunction solar cell, solarcity, silevo  

10.04.16 23:57
3

94 Postings, 3616 Tage drifty@H731400

Danke für die Präzisierungen und Relativierungen.
Trotzdem erachte ich die Silevo Sache als grosses künftiges Potential im stark wachsenden Solarsegment innerhalb der westlichen Hemisphäre.  

11.04.16 19:23
5

5925 Postings, 5879 Tage PalaimonGeht eigentlich jemand

zur Generalversammlung am 3. Mai?
-----------
An der Börse ist alles möglich, auch das Gegenteil.  
André Kostolany

MfG
Palaimon

12.04.16 00:26
3

94 Postings, 3616 Tage drifty@Palaimon

Mir ist schon beim Lesen des PDF so schlecht geworden, dass ich wahrscheinlich in diesem Jahr auf das Verzehren des für mich teuersten Burger verzichte.
 

12.04.16 12:36
2

7891 Postings, 5199 Tage paioneerpalaimon...

bin am überlegen zur gv zu gehen. gehst du? kannst mir ja eine bm senden.  

12.04.16 19:56
4

5925 Postings, 5879 Tage PalaimonWenn ich in der Nähe leben würde,

ja. Aber von Hamburg ist der Trip nun doch etwas weit, es sei denn, man verbindet es mit einem Kurzurlaub. Aber da der Hafengeburtstag am 5.5. beginnt und Besuch ansteht, ist das nicht möglich. Bad timing.
-----------
An der Börse ist alles möglich, auch das Gegenteil.  
André Kostolany

MfG
Palaimon

13.04.16 13:05
1

80 Postings, 3088 Tage ricardo_rsanstehender Auftrag Indien

Meyer Burger Finanznachrichten.
Habe heute mal eine kleine, zweite Tranche geschnappt.
Vielleicht geht die globale Aufrüstung wieder schneller
als man denkt ...  

18.04.16 10:48
1

17831 Postings, 4184 Tage H731400Mitbewerber

am 28.4. kommen die Centrotherm Zahlen plus Ausblick, da steht im GB mehr drin zum Markt + Lage als bei M&B, wobei ich mir von der Aktie auch deutlich mehr verspreche auf Grund der niedrigen Bewertung. M&B hat sich ja diesmal ganz schön zurück gehalten mit dem Ausblick etc......  

19.04.16 10:38
1

5754 Postings, 3567 Tage BrennstoffzellenfanMeyer Burger (MBTN)

Meyer Burger (MBTN)

Ordentliche Generalversammlung am 3. Mai 2016 im Stade de Suisse in Bern.

Bei www.meyerburger.com dürfte bald mal was gehen. Die Aussichten in Asien hellen sich auf und sonnige Monate stehen an:-)
 

19.04.16 15:09
1

17831 Postings, 4184 Tage H731400Aufträge

25.04.16 11:19
1

7891 Postings, 5199 Tage paioneernun könnte es doch bedeutend tiefer...

gehen, als erwartet. 2.25€ sollten daher niemand wirklich verwundern. pulver trocken halten...  

26.04.16 10:49

4 Postings, 2929 Tage delSolDirection Zero

hier schwärmen fast alle ständig von MBTN .... "sonnige Aussichten" etc. aber die Aktie geht nur in eine Richtung und das nicht zu knapp .... Aktie sinkt, Verlust wächst ...  

26.04.16 11:23
1

7891 Postings, 5199 Tage paioneerdelsol...

bei dem kurs wird wohl keiner ins schwärmen geraten. die ct wird das übrige tun, um den kurs weiter in den keller zu senden. dessen sind oder sollten sich alle investierten bewusst sein. der kurs wird nur drehen, wenn endlich die prognosen von herrn pauli in harte fränkli umgemünzt werden. die chancen dass dies geschieht, stehen weiterhin gut. mb ist schliesslich keine hinterhof firma, deren qualitätsprodukte sind weltweit hoch im kurs und das wird die nachfrage auch bald wieder verdeutlichen...  

26.04.16 11:29
1

17831 Postings, 4184 Tage H731400@delsol

hast aber Recht, M&B ist halt fast noch zu groß........um richtig profitabel zu werden. DO bringt der größte Mitbewerber Centrotherm Zahlen+Ausblick. Die sind jetzt durch den hart Cut besser aufgestellt, da bin ich mal gespannt was die erzählen. Pauli hat sich ja mal zurück gehalten. :-)) muss aber nicht schlecht sein.  

27.04.16 08:44
1

5754 Postings, 3567 Tage BrennstoffzellenfanMeyer Burger


BNDES scheint vorwärts zu machen mit der Finanzierung von Solarfabriken in Brasilien. Vieleicht reicht es ja noch für gute News bis oder an der GV von Meyer Burger am 3. Mai 2016.

http://m.pv-magazine.com/news/details/beitrag/...-by-bndes_100024309/  

27.04.16 09:56
1

7891 Postings, 5199 Tage paioneerbrennstoff...

good news kommen bald so oder so. es ist geduld gefragt und man darf sich (noch) in ruhe überlegen, ob man an den turnaround glaubt. falls ja, dann sind das absolute tiefstkurse, die man zum einstieg/nachkauf nutzen sollte. ich jedenfalls bin fleissig am sammeln...  

27.04.16 11:34
1

7891 Postings, 5199 Tage paioneersieht doch gut aus...

hoffentlich nicht nur eine technische gegenbewegung. vielleicht können wir das atl vermeiden und drehen schon jetzt wieder. wäre mir recht, auch wenn ich gern noch einen ordentlichen schluck genommen hätte...  

27.04.16 11:49
2

5754 Postings, 3567 Tage BrennstoffzellenfanMeyer Burger

Sieht aus, als ob hier bald ein saftiger Short-Squeeze ansteht (über 15% aller ausstehenden Titel sind leer verkauft).

Zu diesen Tiefst-Kursen (fast Allzeit-Tiefstkursen!) konnten sich nur ganz wenige eindecken. Je schneller das Ding jetzt nordwärts schiesst, desto besser:-)

Auch die Ölpreise ziehen wieder an und die Sonne scheint.

Hoffe auf einen kräftigen und nachhaltigen Anstieg!!!

Bitte Drücken-Drücken-Drücken und Kaufen-Kaufen-Kaufen (und damit den Short-Squeeze anheizen:-)  

28.04.16 12:58
1

17831 Postings, 4184 Tage H731400Kräftiger Anstieg

Keine Ahnung ob der kommt, M&B verbrennt weiterhin viel Geld. Dachte auch der Ausrüstermarkt zieht deutlich besser an 2016.....echt schwer einzuschätzen.....  

28.04.16 15:50
2

80 Postings, 3088 Tage ricardo_rs...

... ich glaube da kommen in den nächsten Monaten
doch sonnige Zeiten von Osten, Westen,
Süden und Norden her :-)
Kapazitäten in D ausgebaut -
hoffentlich im vernünftigen Rahmen
mit entsprechender Kosten- / Nutzen-Rechnung.
Brasilienferien sind gebucht :-)
 

Seite: 1 | ... | 14 | 15 | 16 |
| 18 | 19 | 20 | ... | 210   
   Antwort einfügen - nach oben