Northgate Minerals Corp. (NGX:TSX)
Seite 1 von 1
neuester Beitrag: 25.04.21 13:13
|
||||
eröffnet am: | 28.12.07 16:58 von: | DAGOBERT. | Anzahl Beiträge: | 10 |
neuester Beitrag: | 25.04.21 13:13 von: | Martinamzrm. | Leser gesamt: | 6463 |
davon Heute: | 1 | |||
bewertet mit 1 Stern |
||||
|
--button_text--
interessant
|
witzig
|
gut analysiert
|
informativ
|
1
Neue Bohrergebnisse von der Mine Young Davidson, die können sich allerdings sehen lassen.
Hoffentlich gibt die Aktie nun mal Gas.
Im nächsten Jahr ist die Förderung von 430.ooo Ounzen Gold in ihren 3 Minen geplant und das bei diesen Goldkursen.
Attention Business Editors:
Northgate Announces Additional Young-Davidson Drill Results - Drill Hole YD07-42B Returns 46.80 Grams per Tonne Gold Over 9.1 Metres
VANCOUVER, Dec. 20 /CNW/ - Northgate Minerals Corporation (TSX: NGX,
AMEX: NXG) today announced assay results for 13 additional diamond drill holes
at its Young-Davidson property near the town of Matachewan, Ontario.
DRILLING HIGHLIGHTS
- Hole YD07-42B, on the eastern flank of the Lower Boundary
zone, intersected 46.80 grams per tonne (g/t) gold over
9.1 metres (m).
- Hole YD07-53, also targeting the Lower Boundary zone,
intersected 80.8m of 2.68 g/t gold including 3.47 g/t gold
over 18.0m. This hole is situated below and about 100m
further to the west than any other intersection in the area.
- Hole YD07-50, drilled on the western flank of the Lower YD
zone, returned results of 5.54 g/t gold over 8.5m.
- The results of these latest holes are being incorporated into
a resource update for the project, which is expected to be
completed in January 2008.
Ken Stowe, President and Chief Executive Officer, remarked, "The
exploration team at Young-Davidson continues to achieve outstanding results.
The continuity of the mineralization in the four main zones is excellent,
which supports our concept of low-cost, large-scale bulk underground mining
for the project. Given the drilling success in 2007, we expect to see another
significant increase in gold resources for the project once the new resource
update is completed next month, which will have a positive impact on the
Pre-Feasibility Study for the project."
--------------------------------------------------
OVERVIEW OF YOUNG-DAVIDSON EXPLORATION AREA
Gold mineralization on the Young-Davidson property is present primarily
in an intrusive syenite host rock dipping at approximately 70 degrees to the
south. Figure 1, shown below, presents known resource areas (as defined in the
legend), historic mine workings, simplified geology, potential new resource
areas along with the pierce points for the holes drilled. Elevations in the
longitudinal section are based on an artificial mine grid where the surface is
defined as 10,355 metres.
Figure 1: Young-Davidson Property (Vertical, North Looking,
Longitudinal Section with Metric Grid)
Weitere Info Wallstreet-Online:
http://aktien.wallstreet-online.de/informer/...=3m&mode=pages_reverse
Weitere Info: Stockhouse:
http://www.stockhouse.com/...h&Displaycurrency=&symbol=NGX&table=list
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
1
Gruß Dagobert37
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
1
Drill Hole YD07-42B Returns 46.80 Grams per Tonne Gold
Over 9.1 Metres
Thursday December 20, 6:35 pm ET
VANCOUVER, Dec. 20 /CNW/ -
Northgate Minerals Corporation -
(TSX: NGX, AMEX: NXG) today announced assay results
for 13 additional diamond drill holes at its
Young-Davidson property near the town of Matachewan, Ontario.
DRILLING HIGHLIGHTS
- Hole YD07-42B, on the eastern flank of the Lower Boundary
zone, intersected 46.80 grams per tonne (g/t) gold over
9.1 metres (m).
- Hole YD07-53, also targeting the Lower Boundary zone,
intersected 80.8m of 2.68 g/t gold including 3.47 g/t gold
over 18.0m. This hole is situated below and about 100m
further to the west than any other intersection in the area.
- Hole YD07-50, drilled on the western flank of the Lower YD
zone, returned results of 5.54 g/t gold over 8.5m.
- The results of these latest holes are being incorporated into
a resource update for the project, which is expected to be
completed in January 2008.
Ken Stowe, President and Chief Executive Officer, remarked, "The exploration team at Young-Davidson continues to achieve outstanding results. The continuity of the mineralization in the four main zones is excellent, which supports our concept of low-cost, large-scale bulk underground mining for the project. Given the drilling success in 2007, we expect to see another significant increase in gold resources for the project once the new resource update is completed next month, which will have a positive impact on the Pre-Feasibility Study for the project."
--------------------------------------------------
OVERVIEW OF YOUNG-DAVIDSON EXPLORATION AREA
Gold mineralization on the Young-Davidson property is present primarily in an intrusive syenite host rock dipping at approximately 70 degrees to the south. Figure 1, shown below, presents known resource areas (as defined in the legend), historic mine workings, simplified geology, potential new resource areas along with the pierce points for the holes drilled. Elevations in the longitudinal section are based on an artificial mine grid where the surface is defined as 10,355 metres.
Figure 1: Young-Davidson Property (Vertical, North Looking,
Longitudinal Section with Metric Grid)
http://files.newswire.ca/592/December_2007.jpg
Beginning in early 2008, three surface drills and one underground drill will continue with exploration. As the ramp development advances, a second underground drill rig will be added.
A new resource calculation is presently underway and will be available in January 2008, which will be incorporated into the Pre-Feasibility Study for the project.
Lower Boundary Zone
Five drill holes: YD07-42B, YD07-47A, YD07-51, YD07-53, and YD07-56 all intersected significant mineralization in the Lower Boundary zone. The results of these holes are presented in Table 1.
Drill holes YD07-42B and YD07-47A, completed between the C1 and C2 dykes, confirm the continuation of the zone in this area. YD07-42B returned 46.80 g/t gold over 9.1m and YD07-47A returned 3.91 g/t gold over 9.5m. The mineralization in hole 47A was partially cut off by a diabase dyke.
Drill hole YD07-51, completed in the upper levels of the Lower Boundary zone, returned 2.55 g/t gold over 32.2m including 7.40 g/t over 6.1m. Hole YD07-56, drilled to test the continuity of the Lower Boundary zone, returned 2.74 g/t gold over 53.5m, including 3.77 g/t gold over 17.5m.
Drill hole YD07-53 is the deepest and most westerly hole that has targeted the Lower Boundary zone. It is over 1,300m deep and about 100m west of YD06-16 and returned a thick intersection of 80.8m grading 2.68 g/t gold including 18.0m of 3.47 g/t gold. This hole confirms the Lower Boundary zone remains open at depth and has continuity towards the Lower YD zone. The results of these holes also illustrate that the Lower Boundary zone is significantly larger than previously known.
Table 1 - Lower Boundary Zone
--------------------------------------------------
Core True Gold-
From To Length Thickness Gold-Cut Uncut
Hole ID (m) (m) (m) (m) 1oz (g/t) (g/t)
--------------------------------------------------
YD07-42B 875.5 897.6 22.1 18.7 2.62 2.62
--------------------------------------------------
incl 875.5 883.7 8.2 6.9 3.62 3.62
--------------------------------------------------
incl 875.5 880.5 5.0 4.2 4.70 4.70
--------------------------------------------------
--------------------------------------------------
937.2 946.3 9.1 7.9 9.84 46.80
--------------------------------------------------
972.0 979.0 7.0 6.1 5.98 5.98
--------------------------------------------------
--------------------------------------------------
YD07-47A 572.7 575.1 2.4 1.7 11.44 24.41
--------------------------------------------------
693.5 703.0 9.5 6.6 3.91 3.91
--------------------------------------------------
750.3 756.0 5.7 4.2 3.04 3.04
--------------------------------------------------
--------------------------------------------------
YD07-51 643.5 675.7 32.2 17.3 2.55 2.55
--------------------------------------------------
incl 669.6 675.7 6.1 3.2 7.4 7.4
--------------------------------------------------
--------------------------------------------------
YD07-53 1301.4 1312.4 11.0 7.6 3.22 3.22
--------------------------------------------------
--------------------------------------------------
1405.2 1486.0 80.8 56.7 2.68 2.68
--------------------------------------------------
incl 1428.3 1459.8 31.5 22.2 3.07 3.07
--------------------------------------------------
incl 1428.3 1446.3 18.0 12.6 3.47 3.47
--------------------------------------------------
incl 1483.0 1486.0 3.0 2.1 7.82 7.82
--------------------------------------------------
--------------------------------------------------
YD07-56 1046.3 1099.8 53.5 41.7 2.74 2.74
--------------------------------------------------
incl 1046.3 1063.8 17.5 13.7 3.77 3.77
--------------------------------------------------
incl 1075.8 1086.6 10.8 8.5 6.38 6.38
--------------------------------------------------
Lucky Zone
Five holes, the first drilled holes from underground, were completed targeting the Lucky zone. Hole R-02 returned 3.98 g/t gold over 29.5m including 8.65 g/t gold over 9.1m. R-03A returned 15.0m of 1.90 g/t gold including 2.4m of 3.48 g/t gold. Hole R-04 was drilled to test the west limit of the Lucky zone and did not return any significant results. Holes R-01 and R-03 were both abandoned for technical reasons before reaching target.
Table 2 - Lucky Zone
--------------------------------------------------
Core True Gold-
From To Length Thickness Gold-Cut Uncut
Hole ID (m) (m) (m) (m) 1oz (g/t) (g/t)
--------------------------------------------------
R-02 216 245.5 29.5 11.3 3.98 3.98
--------------------------------------------------
incl 216 223.5 7.5 3.0 3.11 3.11
--------------------------------------------------
incl 236.4 245.5 9.1 3.2 8.65 8.65
--------------------------------------------------
--------------------------------------------------
R-03A 178.5 199.5 21.0 12.2 1.89 1.89
--------------------------------------------------
incl 178.5 187.5 9.0 5.2 2.30 2.30
--------------------------------------------------
--------------------------------------------------
225.9 240.9 15.0 8.7 1.90 1.90
--------------------------------------------------
incl 226.8 229.2 2.4 1.4 3.48 3.48
--------------------------------------------------
incl 235.7 240.9 5.2 3.0 2.35 2.35
--------------------------------------------------
R-04 No significant values
--------------------------------------------------
Lower YD Zone
Five new drill holes were completed on the Lower YD zone. The deepest hole, YD07-46A, intersected a dyke at the zone horizon and only returned 1.17 g/t gold over 41.3m of what is thought to be footwall zone.
Drill holes YD07-50, 52, 54, and 55 were completed at various levels on the west flank of the known Lower YD zone as illustrated in Figure 1. All of these holes intersected zone material. YD07-50, the lowest hole, returned 3.03 g/t gold over 24.0m including 5.54 g/t gold over 8.5m. YD07-52, completed about 380m above YD07-50, returned 1.90 g/t gold over 15.4m including 3.47 g/t gold over 3.0m. YD07-55, situated about 130m above YD07-52, returned 4.12 g/t gold over 15.6m and YD07-54, a further 100m higher, returned 2.4 g/t gold over 24.8m including 3.16 g/t gold over 11.5m.
Table 3 - Lower YD Zone
--------------------------------------------------
Core True Gold-
From To Length Thickness Gold-Cut Uncut
Hole ID (m) (m) (m) (m) 1oz (g/t) (g/t)
--------------------------------------------------
YD07-46A 1435.5 1476.8 41.3 24.6 1.17 1.17
--------------------------------------------------
incl 1465.4 1476.8 11.4 6.7 1.75 1.75
--------------------------------------------------
--------------------------------------------------
YD07-50 1045.6 1069.6 24.0 20.6 3.03 3.03
--------------------------------------------------
incl 1052.0 1060.5 8.5 7.3 5.54 5.54
--------------------------------------------------
--------------------------------------------------
YD07-52 644.3 659.7 15.4 8.7 1.90 1.90
--------------------------------------------------
incl 648.1 652.2 4.1 2.5 2.94 2.94
--------------------------------------------------
incl 656.7 659.7 3 1.8 3.47 3.47
--------------------------------------------------
--------------------------------------------------
YD07-54 360.7 385.5 24.8 14.8 2.40 2.40
--------------------------------------------------
incl 372.5 384.0 11.5 6.9 3.16 3.16
--------------------------------------------------
--------------------------------------------------
YD07-55 549.4 565 15.6 10.5 4.12 4.12
--------------------------------------------------
incl 549.4 561.1 11.7 7.8 4.89 4.89
--------------------------------------------------
QUALITY CONTROL - ANALYSES AND SAMPLE LOCATION
Details of quality assurance/quality control procedures for sample analysis and drill hole survey methodology are reported in detail in the National Instrument 43-101 (NI 43-101) Technical Report filed on SEDAR (www.sedar.com) on January 29, 2007. A summary of these procedures may also be found in a press release dated April 10, 2006.
QUALIFIED PERSONS
The program design, implementation, quality assurance/quality control and interpretation of the results is under the control of Northgate's geological staff that includes a number of individuals who are qualified persons as defined under NI 43-101. Overall supervision of the program is by Carl Edmunds, PGeo, Northgate's Exploration Manager.
NOTE TO US INVESTORS:
The terms "Mineral Reserve", "Proven Mineral Reserve" and "Probable Mineral Reserve" are Canadian mining terms as defined in accordance with NI 43-101 Standards of Disclosure for Mineral Projects under the guidelines set out in the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") Standards on Mineral Resources and Mineral Reserves Definitions and Guidelines adopted by the CIM Council on August 20, 2000. The terms "Mineral Resource", "Measured Mineral Resource", "Indicated Mineral Resource", and "Inferred Mineral Resource" used in this news release are Canadian mining terms as defined in accordance with NI 43-101-Standards of Disclosure for Mineral Projects under the guidelines set out in the CIM Standards.
NORTHGATE MINERALS CORPORATION is a gold and copper mining company focused on operations and opportunities in the Americas. The Corporation's principal assets are the Kemess South mine in north-central British Columbia and the Young-Davidson property in northern Ontario. Northgate is listed on the Toronto Stock Exchange under the symbol NGX and on the American Stock Exchange under the symbol NXG.
FORWARD-LOOKING STATEMENTS:
This news release includes certain "forward-looking statements" within the meaning of section 21E of the United States Securities Exchange Act of 1934, as amended. These forward-looking statements include estimates, forecasts, and statements as to management's expectations with respect to, among other things, future metal production and production costs, potential mineralization and reserves, exploration results, progress in the development of mineral properties, demand and market outlook for commodities and future plans and objectives of Northgate Minerals Corporation (Northgate). Forward-looking statements generally can be identified by the use of forward-looking terminology such as "may," "will," "expect," "intend," "estimate," "anticipate," "believe," or "continue" or the negative thereof or variations thereon or similar terminology. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable by management are inherently subject to significant business, economic and competitive uncertainties and contingencies. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from Northgate's expectations are disclosed under the heading "Risk and Uncertainties" in Northgate's 2006 Annual Report and under the heading "Risk Factors" in Northgate's 2006 Annual Information Form (AIF) both of which are filed with Canadian regulators on SEDAR (www.sedar.com) and with the United States Securities and Exchange Commission (www.sec.gov). Northgate expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise.
APPENDIX 1 - DRILL HOLE COLLAR LOCATIONS
--------------------------------------------------
Collar Collar Depth
Hole ID Easting Northing Elevation Azimuth Dip (m)
--------------------------------------------------
YD07-42B 23523.9 9937.9 10319.7 356 -70 1014.0
--------------------------------------------------
YD07-46A 22685.0 9725.0 10331.0 0 -70 1536.0
--------------------------------------------------
YD07-47A 23513.1 10064.7 10326.9 0 -70 816.0
--------------------------------------------------
YD07-50 22685.0 9963.0 10355.0 357 -70 1138.0
--------------------------------------------------
YD07-51 23360.0 10110.0 10316.9 0 -70 702.0
--------------------------------------------------
YD07-52 22755.0 10170.0 10333.1 0 -70 711.0
--------------------------------------------------
YD07-53 23000.0 9690.0 10332.0 0 -70 1536.0
--------------------------------------------------
YD07-54 22886.9 10310.4 10318.6 325 -66 631.0
--------------------------------------------------
YD07-55 22794.0 10238.0 10333.0 0 -70 730.5
--------------------------------------------------
YD07-56 23130.0 9870.0 10319.5 0 -70 1150.0
--------------------------------------------------
R-02 23205.0 10657.7 10191.0 186 -50 397.0
--------------------------------------------------
R-03A 23206.4 10657.8 10191.1 175 -38 265.0
--------------------------------------------------
R-04 23204.8 10657.8 10191.1 201 -42 327.0
--------------------------------------------------
For further information
Ms. Keren R. Yun, Manager, Investor Relations, (416) 216-2781, kyun@northgateminerals.com
Source: Northgate Minerals Corporation
http://biz.yahoo.com/cnw/071220/northgate_drill_resul.html?.v=1
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
1
--------------------------------------------------
Blackmont Capital Richard Gray
416-864-3600
Canaccord Adams
Steven Butler
416-869-7368
CIBC World Markets
Brad Humphrey
416-594-7000
Credit Suisse
Anita Soni
416-352-4500
Merrill Lynch
Michael Jalonen
416-369-7400
Morningstar
Vahid Fathi
312-384-4000
Orion Securities George Albino
416-848-3500
Research Capital
Barry Allan
416-860-7600
Salman Partners Rodney Stevens
416-861-1270
Scotia Capital David Christie
416-863-7411
TD Securities Steven Green
416-982-6160
UBS Tony Lesiak
416-364-3293
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
1
Dann kommen News von kemess North und von Young davidson. und das bei diesem Goldkurs am 28.12.07 von 838,80 US $.
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
1
Sollen uns erst einmal die Genehmigung zum Buddeln auf dem Kemess-North-Gebiet vorlegen, damit sie dort endlich mit der Förderung des goldhaltigen Gesteins losgehen können.
Den Rest wird uns dann noch der australische Goldförderer dazugeben.
Optionen
Antwort einfügen |
Boardmail an "DAGOBERT37" |
Wertpapier:
Nasdaq 100
|
0
Gute Nachrichten sorgen für Anstieg des Kupferpreises
Leser des Artikels: 1418
Nachdem der Preis für Kupfer seit Anfang Oktober diesen Jahres rückläufig ist, setzte er in den letzten Handelstagen zu einer Jahresendrallye an. Die Gründe für den Preisanstieg sind positive Nachrichten aus China.
Das Finanzministerium in Beijing kündigte auf seiner Webseite die Streichung einer 2-prozentigen Importsteuer für veredelte Kupferprodukte an. Dies sollte einen positiven Einfluss auf den Import des Metalls durch den weltweit größten Konsumenten von Kupfer haben. Die Importe aus Chile nach China sind bereits steuerbefreit.
Im Vergleich zum Vorjahr kletterte der Import von veredeltem Kupfer in China in den 11 Monaten bis zum 30. November um 84 % auf 1,4 Mio. Tonnen. Im November importierte China 103.410 Tonnen an Kupfer und damit 5,4 % mehr als im Vormonat und 55,8 % mehr als im Jahr zuvor.
Zusätzlich erhielt der Kupferpreis Unterstützung von Berichten der London Metal Exchange (LME), wonach die Kupferbestände um 100 Tonnen auf nun 198.225 Tonnen schrumpften.
Auch in Shanghai fielen die Kupferbestände um 2,5 % auf 25.722 Tonnen, dem niedrigsten Level seit dem 01. Februar diesen Jahres. Ein chinesischer Metallhändler sprach von einer hohen physischen Nachfrage in den letzten Wochen, auch von privater Seite. Es gab wohl Befürchtungen eines drohenden Angebotsdefizits.
Insgesamt liegen die Lagerbestände an Kupfer derzeit bei 237.902 Tonnen. Dies entspricht einem durchschnittlichen Weltverbrauch in Höhe von 4,8 Tagen. Im Jahresverlauf lagen die Bestände im Durchschnitt bei 4,9 Tagen des weltweiten Kupferbedarfs.
Der Kupferpreis gilt als wichtiger Indikator für die Entwicklung der Weltkonjunktur. Das Aufkeimen der Subprime-Krise in den USA und die eventuell daraus resultierenden Spätfolgen für die amerikanische Wirtschaft schürten Rezessionsängste auf dem weltweit zweitgrößten Konsumentenmarkt für Kupfer.
Daraufhin kam es ab Mitte Oktober zu einem Abwärtstrend beim Kupferpreis, der erst vor wenigen Tagen mit dem aktuell positiven Sentiment für Kupfer stoppte und zumindest für eine kurzfristige Gegenrallye sorgte.
Ein weiterer Indikator für die Erwartungshaltung der Märkte stellt das Verhältnis von Calls zu Puts dar. Derzeit übersteigen die Calls für das Industriemetall die Puts um das 2,3-fache. Dies bedeutet, die Marktteilnehmer erwarten in der nahen Zukunft einen Anstieg des Kupferpreises.
Autor: Sven Olsson
Optionen
Antwort einfügen |
Boardmail an "HamburgMiami" |
Wertpapier:
Nasdaq 100
|
0
Optionen
Antwort einfügen |
Boardmail an "HamburgMiami" |
Wertpapier:
Nasdaq 100
|
0
ALlzeit-Hoch des Goldes ist am 2.1.2008 um ----
ca 18:15 h Kurs 860,60 US $
Optionen
Antwort einfügen |
Boardmail an "HamburgMiami" |
Wertpapier:
Nasdaq 100
|