Liquidmetal/Vi Technologies

Seite 3 von 23
neuester Beitrag: 14.07.21 13:04
eröffnet am: 06.03.04 15:20 von: naoiso Anzahl Beiträge: 566
neuester Beitrag: 14.07.21 13:04 von: FPunkt Leser gesamt: 209873
davon Heute: 33
bewertet mit 7 Sternen

Seite: 1 | 2 |
| 4 | 5 | 6 | 7 | 8 | 9 | ... | 23   

21.09.12 18:18

4792 Postings, 8233 Tage GilbertusiPhone-5 Verkaufsstart Heute

 Das neue iPhone-5 von Apple ist bereits mit "Aluminium"-Gehäuse.

So wie ich Apple kenne, wird Schritt für Schritt eine Verbesserung eingeführt, seine Kunden

somit stets mit Neuigkeiten "angefüttert".

Folgerichtig wird der nächste Schritt also von "Aluminium" zu "Liquidmetall" sein,

comprendre ?

Ich jedenfalls bleibe drin, habe nochmals 2 x aufgestockt. Es dauert jetzt halt etwas

länger, aber NUR GEDULD bringt bekanntlich ROSEN.

:cool:

-----------
So wie einem das Licht nicht ohne die Dunkelheit bewusst würde, so gibt es keine Situation, in der nicht etwas POSITIVES zu entdecken wäre.

Frei nach I Ging

01.02.13 01:58
1

4792 Postings, 8233 Tage GilbertusApple: Neue Modelle mit Liquidmetall-Gehäuse ?

 Ja, so wie es aussieht, könnte es diesmal, 2013 tatsächlich soweit sein;

 

www.macnn.com/articles/13/01/31/...es.for.plastic.in.future.products/

 

Das wäre der absolute Hammer, damit würde sich Apple noch mehr vom "Plastik-Schrott"

seiner Nebenbuhler unterscheiden, mit einem Ganz-Gehäuse aus einem Guss aus

Liquidmetall, das fünfmal härter ist als Stahl.

-----------
So wie einem das Licht nicht ohne die Dunkelheit bewusst würde, so gibt es keine Situation, in der nicht etwas POSITIVES zu entdecken wäre.

Frei nach I Ging

06.02.13 02:44

151 Postings, 4068 Tage LQMT2013 ?

Also ich bin auch schon länger interessiert an LiquidMetal, habe heute noch nachgekauft...
Bin zwar noch im minus, aber für mich bin ich long drin.

Ob es 2013 etwas mit LQMT gibt bleibt abzuwarten... Vielleicht werden wir überrascht.

Nicht nur Apple ist Partner... So auch die Swatch Group seit 2011 die Exklusiv sich die Rechte für Uhren gesichert hat.

Ich hoffe lqmt schafft den großen Erfolg...  

08.02.13 01:06

151 Postings, 4068 Tage LQMT2013 ?

wenn JETZT Spezialisten gesucht werden für die Verarbeitung, glaube ich nicht an 2013...
Aber vielleicht verlängert dann Apple erneut und LQMT bekommt wieder Dollars.

Apple als Partner zu haben ist viel wichtiger für die Firma wie das Geld... ...  

13.02.13 09:04

151 Postings, 4068 Tage LQMTiWatch?

LiquidMetal: When it comes to how an iWatch might look, there is much debate about whether it would go the iPod nano route or instead take design cues from a more traditional watch. One possibility is LiquidMetal. Apple has been patenting a lot of technologies and manufacturing processes related to using LiquidMetal in different form factors since acquiring rights to the amorphous metal alloys. We also already saw the material used before in high-end watches (video above), but have not seen the highly versatile material make a major contribution to Apple’s product lines.

-----

Watchstrap: Apple could go with a high quality LiquidMetal for the watch’s strap, but it could also have a huge market in inexpensive, interchangeable watchstraps like it did with the sixth-generation iPod nano. According to the Wall Street Journal, Foxconn and Apple have tested watch prototypes. One patent coming from Foxconn gave us a look at a watchstrap that integrates a way to store headphones and an extra battery in the strap itself (pictured above).


Quelle:

http://9to5mac.com/2013/02/12/...tion-on-apples-watchmaking-activity/  

19.02.13 16:29

151 Postings, 4068 Tage LQMTmehr

so, noch einmal nachgekauft... Jetzt wird es Zeit das etwas passiert...  

20.02.13 09:44
1

151 Postings, 4068 Tage LQMTnews:

RANCHO SANTA MARGARITA, Calif.--(BUSINESS WIRE)--
Liquidmetal® Technologies, Inc. (LTI) (LQMT), the leading developer of amorphous alloys and composites, has reported an increased level of Liquidmetal prototype parts shipped to major players in the aerospace, defense, and medical industries.
Liquidmetal alloy is a new class of material that is sparking an industrial revolution much in the same way as the invention of steel or plastics. The growing number of shipments in 2012, as well as the increasing number of active prototypes undergoing extensive evaluation by customers, reveals an intensifying interest in the unique performance characteristics of this patented alloy system.
The name of Liquidmetal is derived from the fact that the alloy appears like metal and has twice the strength of titanium, but possesses an amorphous (non-crystalline, liquid-like) atomic structure that behaves more like plastics, particularly during the manufacturing process. This results in a unique combination of properties for Liquidmetal-based parts, such as “high hardness,” elasticity, high strength-to-weight and resistance to corrosion and abrasion. Its unique molding characteristics during the manufacturing process allow for an extraordinary level of intricacy and precision as well as the creation of complex parts designs never before thought possible.
Q4 and 2012 Prototype Summary
In 2012, 10 prototype shipments were delivered to customers in the aerospace/defense, medical and other industries, which was up 233% from 2011.
At the end of the fourth quarter of 2012, there were 10 Liquidmetal prototypes parts actively being evaluated by customers. This is up from seven in the prior quarter and up from three in the same year-ago quarter.
Prototypes allow potential or current customers to analyze and qualify parts before full production runs begin. This is typically a complex and lengthy process, and often requires a number of prototype iterations.
In November, Liquidmetal Technologies announced the first successful transition of a prototype part into commercial production with the shipment of a large order of specialized parts from its certified manufacturing partner. This process had progressed from lab-prototype parts produced in the Liquidmetal R&D facility to production-prototype parts built in the contract manufacturing facility, and culminated with fully-qualified production parts being ordered and shipping on a regular basis to a leading global manufacturer.
“This dramatic increase in the demand for prototype parts has been well-timed to the certification of our first commercial production capabilities,” said Tom Steipp, Liquidmetal Technologies’ president and CEO. “With our third-generation Liquidmetal manufacturing process introduced in early 2012, we’ve demonstrated we can meet the demanding requirements of our customers. This is stimulating interest and confidence in our Liquidmetal solutions, and now our prototype pipeline has never been stronger.”
According to Dr. Glenton Jelbert, the company’s new vice president of engineering: “While it is typically a lengthy process leading from prototype development to purchase orders for production-level parts, we’re confident that as we continue to work closely with our customers to perfect their Liquidmetal alloy parts, we expect to see more prototypes entering into commercial production over the course of the year.”
Jelbert was recently appointed to oversee the company’s numerous development projects, including next-generation golf clubs, based on Liquidmetal alloys, as well as pursue opportunities that enhance the company’s extensive IP portfolio.
About Liquidmetal Technologies
Rancho Santa Margarita, California-based Liquidmetal Technologies, Inc. is the leading developer of bulk alloys and composites that utilize the performance advantages offered by amorphous alloy technology. Amorphous alloys are unique materials that are distinguished by their ability to retain a random structure when they solidify, in contrast to the crystalline atomic structure that forms in ordinary metals and alloys. Liquidmetal Technologies is the first company to produce amorphous alloys in commercially viable bulk form, enabling significant improvements in products across a wide array of industries. For more information, go to www.liquidmetal.com.  

21.02.13 22:20

151 Postings, 4068 Tage LQMTstill hier...

huii endlich mal wieder grün... hoffe die 0.8 sind Vergangenheit... Bald steht ja einiges an...  

27.02.13 11:00

151 Postings, 4068 Tage LQMTneu ...

Liquidmetal Technologies' CEO Discusses Q4 2012 Results - Earnings Call Transcript
Feb 26 2013, 18:38 | about: LQMT.OB

Liquidmetal Technologies, Inc. (LQMT.OB) Q4 2012 Earnings Call February 26, 2013 4:30 PM ET

Operator

Good afternoon. Welcome to the Liquidmetal Technologies" Fiscal 2012 Conference Call. My name is Michaela and I will be your conference operator this afternoon. Joining us today are, Liquidmetal"s President and CEO, Tom Steipp and CFO, Tony Chung. Following their remarks, we will open up the call for your questions.

Before we proceed, I would like to provide the company's Safe Harbor statement with important cautions regarding forward-looking statements made during this call as follows. All statements made by management during this call that are not based on historical facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 and the provisions of Section 27A of the Securities Act of 1933 as amended, and Section 21E of the Securities Exchange Act of 1934 as amended.

Such forward-looking statements include, but are not limited to, those made by Mr. Steipp and Mr. Chung regarding the company"s cash, revenue outlook and technology development. While management has based any forward-looked statements made during the call on its current expectations, the information on which such expectations were based may change. These forward-looking statements rely on a number of assumptions concerning future events and are subject to a number or risks, uncertainties and other factors, many of which are outside the company's control that could cause actual results to materially differ from such statements. Such risks, uncertainties and other factors include but are necessarily limited to, those set forth under risk factors in the company's annual report on Form 10-K for the year ended December 31, 2011.

Accordingly, you should not place any reliance on forward-looking statements as a prediction of actual results. The company disclaims any intention and undertakes no obligation to update or revise any forward-looking statements. You are also urged to carefully review and consider the various disclosures in the company's annual report on Form 10-K for the year ended December 31, 2011, as well as other public filings with the SEC since such date.

I would also like to remind everyone that this call will be available for replay starting later this evening via a link available in the Investor Relations section of the company's website at www.liquidmetal.com.

Now I would like to turn the call over to the company's President and CEO, Mr. Tom Steipp. Please go ahead.

Tom Steipp - President & CEO
Thank you, Michaela. Welcome everyone and thank you for joining us on today's call. Revenue for fiscal 2012 remained at a nominal level reflecting our continuing focus on manufacturing prototype parts as a precursor for long-term supply agreements with customers for production parts. Of more significance however was the shipment of 10 new liquid metal prototype parts to customers during 2012 versus three in 2011, which was up 233%. In particular, the bulk of these prototype shipments, seven out of 10 occurred in the second half of the year demonstrating the momentum and effectiveness of our sales and marketing efforts.

In addition, to the increase in prototypes during the second half of 2012, we continued monthly shipments of production parts to Swatch reflecting validation of our production capacity. We also experienced substantial growth in our IP portfolio, ending the year with 56 patents and more than 50 patent applications pending. Throughout the year, we also saw the expansion of our technology and product offerings to prospective customers.

During our discussion with potential customers who are looking for ways to push their product design envelopes, we often encountered design needs that can"t be met by Liquidmetal parts. Since our goal is to be a trusted advisor to these potential partners, we actively seek to solve their problems in the best possible way, even if that means using slightly different technology.

Towards that end, in the fourth quarter, we began to complete prototypes produced on 6-axis milling machines as well as Direct Metal Laser-Sintering, DMLS or 3D printing machines to one of our strategic customers in the aerospace and defense market. Just for clarification, these parts are not included in our totals for shipped prototypes in either the quarter or for the year.

In many ways 2012 laid the foundation for our next phase of development. In 2013, you will see us continue to build on these recent events especially in the following areas. First and foremost, we plan to continue our efforts to increase shipments and prototypes parts to customers primarily in the medical, defense, industrial and most recently the oil and gas markets. We now have 15 strategic cornerstone accounts which all have identified product champion and are aggressively testing samples or prototype parts. The bulk of our efforts over the next 12 months would be to further penetrate these accounts by leveraging the contacts and success that we have made to-date.

Secondly, we will renew efforts to license our technology to category leading companies receive the benefits of introducing Liquidmetal solutions into their markets. You will recall that we sold a non-exclusive license to Swatch in 2009 and exclusive license to Apple in 2010 and an exclusive license to Swatch in 2011. We see opportunities for significant partnerships in areas such as golf, oil and gas and eye wear.

License relationships are a way to expand the market for Liquidmetal as well as a non-dilutive way of raising cash for operations. In addition to the first two initiatives, we expect to continue our trust to increase the pool of intellectual property contained increasable.

During 2012, we issued one new patent bringing our total to 56 and filed an additional 50 patent applications. Our objective is to expand the breadth and depth of IP portfolio in a way that it maximizes the value of our technology to our partners, our customers and ultimately to our shareholders. Much of the intellectual property developed during the past year relates to the development of our injection molding machine.

These advancements have resulted in machines capable of higher quality, improved efficiency and an increased capacity for our customers and our licensees. In summary, we believe that continued focus on progress on each of these areas will result in a stronger base of satisfied customers, a broader base of licensees and partners and increased value for both customers and shareholders.

Before I turn the call over to Tony, I would like to make a brief comment about our upcoming special shareholder meeting which will take place on February 28. As you know, our board of directors has directed the company to seek an increase in the authorized number of shares from $400 million to $500 million. The purpose of this increase in authorized shares is simply to provide flexibility as the company seeks to meet this obligations under the terms of our financing completed in July of 2012.

As part of that funding, the company is required to amortize $1 million worth of debt principal each month in either stock or cash. In order to maximize long-term shareholder value, the board of directors would like to ensure that the company maintains the flexibility as obligation in either cash or stock. Therefore, I would strongly urge each of you to vote your shares in favor of the proposed increase.

Now, I would like to turn the call over to our CFO, Tony Chung, who will take us through the financial details for the year. I will then return to talk a little bit more about the operational progress in our first quarter of 2013 and then finally the outlook ahead.

Tony Chung - CFO
Thanks Tom and good afternoon everyone. Our financial results for fiscal 2012 reflect our company's continued advancement to a development stage of both prototype parts production and our IP. In this context, let's turn to the financial results for the fiscal year ended 2012.

We generated $650,000 of revenue compared to $972,000 of revenue in 2011. The decrease was primarily due to a one-time license amendment fee of $381,000 from Swatch recognized in 2011.


Our gross margin decreased to $296,000 from $599,000 in 2011. However, excluding license and royalty revenue, our gross margin was $237,000 representing 40% of revenue in 2012 and $199,000 representing 35% of revenue in 2011.

Currently, our revenues consistent of prototypes and preproduction revenue. As we increase our revenues with shipments of production level parts, we expect our gross margin to stabilize and become more predictable.

Selling, marketing general and administrative expenses totaled $4.9 million versus $4.2 million in 2011. The increase was primarily due to the increased headcount for our sales and business development efforts as we continue to aggressively expand our sales and marketing presence within our current account base.

Research and development expense was $943,000 compared to $1.1 million in 2011. We spent less on production supplies and consultants during the year, while we continued to perform research and development of new Liquidmetal alloys and manufacturing techniques.

Now, I would like to go over some of our significant non-recurring expenses during 2012 and 2011. In 2012, we had a one-time non-cash expense of $6.3 million with a discount pricing received under Visser Precision Cast and Master Transaction Agreement in June 2012.

During 2011, we had a one-time expense related to legal settlement with SAGA our former licensee. Excluding these non-recurring expenses, our operating loss was $5.5 million compared to $4.8 million in 2011.

Turning to our balance sheet, we ended 2012 with $7.2 million of cash. We anticipate that our current capital resources together with income from operations will be sufficient to fund our operations through the end of 2013.

I would like to now turn the call back over to Tom.

Tom Steipp - President & CEO
Thanks Tony. Well, as Tony indicated during 2012, we continued to make steady progress in our transition from a development stage company to a commercial product company. Here's what you should expect us to be focusing on in the first quarter and the remainder of 2013.

Number one, further penetration at existing global accounts to increase the number of prototype and production parts. These efforts were evident based on number of prototype shipped in the second half of 2012 but we want to keep that momentum going through 2013.

Number two, renewed emphasis on license revenue as a source of non-dilutive cash for continuing operations.

And finally number three, the continued focus to extend and strengthen our IP portfolio as we leverage our core technology into commercial production capabilities that improve quality, the efficiency and production capacity for our customers and licensees.

In summary, we are encouraged by the progress we made in 2012. We continue to attract new customers who invest in prototype parts as well as convincing current customers to adapt more Liquidmetal prototype parts.

We are optimistic about the partnerships that we've made with some of the world"s most innovative companies. These companies have seen unique characteristics of Liquidmetal, high strength to weight, hardness and corrosion resistance as harbingers for the advancement of material science and a catalyst for design and manufacturing transformation.

We believe that the game changing capabilities of Liquidmetal are building a foundation of value for our customers as well as for our shareholders.

Before I open the call up to questions, I would like to remind everyone once again about the importance of voting on a proposed extension of our share authorization.

Now, with that, Michaela, please provide the appropriate instructions for those on the line for questions.

Question-and-Answer Session

Operator

Yes sir. Ladies and gentlemen, we will now begin the question-and-answer session. (Operator Instructions) And our first question comes from the line of (inaudible) from JP Morgan. Please go ahead.

Unidentified Analyst

I have quick question. So I know that back in 2010 and then back last year, Apple renewed their cross licensing agreement with Liquidmetal and essentially that allows them to cross license technology that they had developed with Liquidmetal technologies to move the technology forward during the commercialization phase.

What I am curious about is I recently read about a new process where now Liquidmetal is able to be made into sheets as opposed to just use ingots And I am curious, could you elaborate upon what the manufacturing benefits would be of manufacturing Liquidmetal in sheets as opposed to in 100 diagram ingots?

Tom Steipp - President & CEO
Let me just make a brief clarification on the capture period agreement that we have with Apple, which does allow us to basically jointly develop IP. But the ownership of the IP is strictly with Liquidmetal goes into a special purpose entity called Crucible for which there are two license streams one that goes to Apple and one that goes to us. So, I suppose to cross licensee and just to update different.

I should make a general comment and that is that everything you"ve heard about Liquidmetal over the course of last 18 months to two years has to do with injection moulding whereby we take a 100 gram in as you point out and we heat that up and melt it and inject it into a mould. There are a variety of extensions of that which pot forming is one, where you take it and mould it, actually can be done outside of the vacuum into a different shape, making it into sheets, where you actually there is never way to make sheets, but what you can do a sheet is you can mould that around to different shape and you can also extrude liquid metal, you can make it into wire.

There are a number of things which we are truly you can do with it. The commercialization of those is probably further behind where we are with injection mould. So the point would be there are lots of thing you can do beyond injection moulding, the evolution of commercialization at this point in time, though is really at the injection moulding phase where you can make parts in a mould. Does that answer your question?

Unidentified Analyst

That does answer my questions. But I was curious about though is with these sheets will that allow you to make larger physical dimensions?

Tom Steipp - President & CEO
Potentially you could, the limitation with Liquidmetal is in cross sectional area. So if you get much beyond 8 or 9 millimeters, it is difficult to make an amorphous part. So if you had ships Liquidmetal then you could make parts that were dimensionally larger. So yeah, there is a number of things going on in that area and what I would say is that the strength of Liquidmetal as a company is that our patents portfolio or our IT portfolio really covers the breadth of the technology all the way from alloys, machines, molds, production, processors as well as application, so hopefully that is your question.

Operator

(Operator Instructions) Our next question comes from the line of [Kelly Holish] of Private Investor. Please go ahead.

Unidentified Analyst

I have three questions. The first question is regarding the technology that you just spoke about for doing sheets and multiple things like that, is the getting factor financial or is it more visibility, its kind of the later development?

Tom Steipp - President & CEO
So Kelly, again I would hack and back little bit, if this was 1913 and instead of 2013, we might be talking about plastics and steel or Liquidmetal, there are number of things that we know you can do with Liquidmetal beyond dye casting, injection molding, processes that we've commercialized at this point in time. It is partially true that we are constrained by a couple of resources in terms of moving beyond the research and development phases into commercial. And what I would say is that on a global basis there is tremendous amount of research going into both metallic glasses which is what Liquidmetal is.

One of the things that we try to actively promote is that as these new technological innovations comes to fruition; we believe that we created the ecosystem to get those to markets most quickly. So we have an alliance of partners, ourselves obviously we are working with Apple on IP, but Materion who makes our alloys, Engel who makes the machines, Visser who does our production in aggregate that group of partners is most able to turn new technological innovation to commercial parts and that's the strategy we've got at this point. Your second question Kelly.

Unidentified Analyst

Yeah, okay so Visser has a facility that they are building as I understand it with a certain square footage and is the capacity, can you comment on the capacity, the planned capacity of that facility in terms of potential throughput and revenue.

Tom Steipp - President & CEO
Yeah, I mean it"s a matter of tax record, the Visser facility is at the intersection of Quebec and I70 in Denver, Colorado. It"s roughly a 250,000 square foot facility. You know depending on the price of the parts that we would make from a machine the value and the amount of revenue that could be derived from a single machine probably runs anywhere from $2.5 million to $7 million to $10 million again depending on the list price of the parts that you would run through the machine. So let's put it this way, at this point in time we have a tremendous upside in terms of the capacity that the company enjoys. We think the foundation we are laying with global accounts is a way to ramp that up as quickly as we can, that's the strategy.

Unidentified Analyst

Did you say global accounts?

Tom Steipp - President & CEO
Our focus of 15 or so account we have right now are for the most part global accounts which mean they have 1000s and 1000s of parts and a global footprint. And then you had a third question.

Unidentified Analyst

Okay. Also you mentioned you know in one of your conferences that's on the internet for example and on your website I guess RedHat or something like that, in an interview you mentioned you know a potential going through a jump you know at some point we are securing a defense contract possibly $7 million to $8 million and you mentioned that I think you mentioned something to that extent in the last conference call but I don't recall exactly. So is that still on the table.

Tom Steipp - President & CEO
Yeah, I would say the focus of our marketing and sales activity at this point in time are with medical and defense companies. These do tend to be long sales lead time activities. I suspect what I probably said is that the bulk of the parts that we encountered in those kind of environments will generally have life cycles of 10 to 20 years, and that a general rule of thumb is that the revenue for a single part over the course of that 10 to 20 years is probably somewhere in the neighborhood of three quarters of million to a $1.5 million, sometimes $2.5 million.

So, we believe that the partnerships that we are developing at this point in time, we have very, very long-term beneficial residual values to the companies as we get in to production.

Operator

Thank you. Mr. Steipp there are no further questions in my queue. Do you have any closing comments?

Tom Steipp - President & CEO
No, I want to thank everyone for joining us on the wrap up for 2012 and we look forward to give an update at the end of first quarter of 2013. I will turn it back to you. Thank you, Michaela.

Operator

Thank you, sir, and thank you everyone for joining us for our presentation. This concludes today"s call. You may now disconnect.

Copyright policy: All transcripts on this site are the copyright of Seeking Alpha. However, we view them as an important resource for bloggers and journalists, and are excited to contribute to the democratization of financial information on the Internet. (Until now investors have had to pay thousands of dollars in subscription fees for transcripts.) So our reproduction policy is as follows: You may quote up to 400 words of any transcript on the condition that you attribute the transcript to Seeking Alpha and either link to the original transcript or to www.SeekingAlpha.com. All other use is prohibited.

THE INFORMATION CONTAINED HERE IS A TEXTUAL REPRESENTATION OF THE APPLICABLE COMPANY'S CONFERENCE CALL, CONFERENCE PRESENTATION OR OTHER AUDIO PRESENTATION, AND WHILE EFFORTS ARE MADE TO PROVIDE AN ACCURATE TRANSCRIPTION, THERE MAY BE MATERIAL ERRORS, OMISSIONS, OR INACCURACIES IN THE REPORTING OF THE SUBSTANCE OF THE AUDIO PRESENTATIONS. IN NO WAY DOES SEEKING ALPHA ASSUME ANY RESPONSIBILITY FOR ANY INVESTMENT OR OTHER DECISIONS MADE BASED UPON THE INFORMATION PROVIDED ON THIS WEB SITE OR IN ANY TRANSCRIPT. USERS ARE ADVISED TO REVIEW THE APPLICABLE COMPANY'S AUDIO PRESENTATION ITSELF AND THE APPLICABLE COMPANY'S SEC FILINGS BEFORE MAKING ANY INVESTMENT OR OTHER DECISIONS.

If you have any additional questions about our online transcripts, please contact us at: transcripts@seekingalpha.com. Thank you!


http://seekingalpha.com/article/...ts-earnings-call-transcript?page=1  

19.03.13 16:35

151 Postings, 4068 Tage LQMTnews

Liquidmetal Technologies to Present at the AeroMat Museum of Flight Event on April 3, 2013
Business Wire

RANCHO SANTA MARGARITA, Calif. -- March 19, 2013

Liquidmetal® Technologies, Inc. (LTI) (OTCQB: LQMT), the leading developer of amorphous alloys, has been invited to present at the Advanced Aerospace Materials and Processes’ (AeroMat) social event being held on Wednesday, April 3, 2013 at The Museum of Flight in Seattle, Washington.

Dennis Ogawa, Liquidmetal Technologies’ vice president of marketing, is scheduled to present at 7:15 p.m. Pacific time. Ogawa will share his abstract titled, “Liquidmetal Technologies: The 3rd Revolution in Material Science.” The abstract focuses on the performance advantages of amorphous alloy technology in the aerospace industry, where tailfins, wings and other parts require strong, lightweight and precise parts that are resistant to corrosion and wear.

Every year AeroMat brings together hundreds of delegates and exhibiting companies to discuss and display the latest advances in materials and processes for aerospace applications. This year’s program is focused on the theme of “Building on a Century of Innovation.” For more information about the AeroMat Conference and Exhibition, visit the event website at http://www.asminternational.org/content/Events/aeromat/networking.jsp.

About Liquidmetal Technologies

Rancho Santa Margarita, California-based Liquidmetal Technologies, Inc. is the leading developer of bulk alloys and composites that utilize the performance advantages offered by amorphous alloy technology. Amorphous alloys are unique materials that are distinguished by their ability to retain a random structure when they solidify, in contrast to the crystalline atomic structure that forms in ordinary metals and alloys. Liquidmetal Technologies is the first company to produce amorphous alloys in commercially viable bulk form, enabling significant improvements in products across a wide array of industries. For more information, go to www.liquidmetal.com.



Contact:
Liquidmetal Technologies, Inc.
Otis Buchanan
Media Relations
949-635-2120
otis.buchanan@liquidmetal.com
or
Liolios Group, Inc.
Matt Glover or Michael Koehler
Investor Relations
949-574-3860
LQMT@liolios.com  

19.03.13 18:47

151 Postings, 4068 Tage LQMT???

keiner hier ???? stille ??? bei so einem interessantem Thema?...  

19.03.13 20:13

30 Postings, 4128 Tage BodoBastlerVll lesen einige auch nur einige stillschweigend m

19.03.13 20:22

151 Postings, 4068 Tage LQMTup

vor kurzen noch bei 0,08 ... ohne WAHRE NEWS ...

hoffentlich kommt da noch etwas! Nicht nur ein kurzer zock...

Ich denke viele hatten gehofft das es noch günstiger als .08 wird, und müssen nun teurer kaufen...  

05.04.13 00:19

151 Postings, 4068 Tage LQMTwillkommen 2013

Liquidmetal Alloy Prototype Shipments Increase 67% in Q1 2013

The 67% Sequential Increase in Prototype Shipments was Driven by a New Application in the Oil & Gas Industry

RANCHO SANTA MARGARITA, Calif.--(BUSINESS WIRE)--Apr. 4, 2013-- Liquidmetal® Technologies, Inc. (LTI) (OTCQB: LQMT), the leading developer of amorphous alloys and composites, has reported an increased level of Liquidmetal prototypes parts shipped to major players in its targeted industries during the first quarter of 2013.

Q1 2013 Prototype Summary

During the first quarter, Liquidmetal delivered five new prototype shipments to five different customers, which was up 67% from the prior quarter and compared to none in the same year-ago period. Each shipment contained multiple prototype parts.
Most of the prototype shipments were to new customers in the oil and gas industry for use in exploration and development activities, which represents a new market for the company.
The company increased its prototype activity with a major customer in the aerospace and defense industry by shipping additional parts of existing active prototypes for further testing and evaluation.
At the end of the first quarter of 2013, there were 15 Liquidmetal prototypes actively being evaluated by customers, up from 10 at the end of the previous quarter and two at the end of Q1 2012.
Prototypes allow potential or current customers to analyze and qualify parts before full production runs begin. This is typically a complex and lengthy process, and often requires a number of prototype iterations.

"We"ve received increased interest in Liquidmetal alloy from major oil and gas exploration companies, which is reflected in the majority of prototype parts we shipped in Q1," said Bruce Bromage, Liquidmetal Technologies" EVP of business development and operations. "Millions of shaped charges are detonated each year to improve flow of oil and gas wells through perforation. We offer the potential to significantly increase the performance of these perforators by exploiting Liquidmetal alloy"s unique combination of glass-like ductility and metallic density as well as its ability to be molded into a rugged, precision form. We believe this represents a substantial new opportunity for Liquidmetal Technologies."

The number of active prototypes undergoing extensive evaluation by customers reveals a growing interest in the amorphous alloy"s distinctive performance characteristics. "As we continue to collaborate with customers to perfect their Liquidmetal alloy parts," added Bromage, "we expect to see a number of these prototypes progress to commercial production over the course of the year."

About Liquidmetal Technologies

Rancho Santa Margarita, California-based Liquidmetal Technologies, Inc. is the leading developer of bulk alloys and composites that utilize the performance advantages offered by amorphous alloy technology. Amorphous alloys are unique materials that are distinguished by their ability to retain a random structure when they solidify, in contrast to the crystalline atomic structure that forms in ordinary metals and alloys. Liquidmetal Technologies is the first company to produce amorphous alloys in commercially viable bulk form, enabling significant improvements in products across a wide array of industries. For more information, go to www.liquidmetal.com.  

17.07.13 23:36

4792 Postings, 8233 Tage GilbertusLiquidmetal startet, ein Plus von 228.96 %

 Aufwachen Freunde, Liquidmetal Technologie hat Heute einen Reketenstart hingelegt,

nach einer sehr, sehr langen Durststrecke. Man muss nur von einer Investition sich selber gut überzeugen,

wie bei Aple vor 10 Jahren z.B., dann kommt der Erfolg irgendwann plötzlich ganz unerwartet schnell, dann ist es

wichtig, dass man an Bord sitzt. Habe jedenfalls sechsstellig massiv Shares im voraus gebunkert,

und es lohnte sich Heute:):cool:;):)

Liquidmetal hat eine Zusammenarbeit/Vetriebsvereinbarung mit einer Namhaften Gesellschaft abgeschlossen, die

Aufträge und die $$$$ können reinkommen. Ich hoffe es hat keiner die Geduld verloren und vorher verkauft ?  Super Qualität setzt sich am Schluss immer durch, irgendwann;

http://www.4-traders.com/LIQUIDMETAL-TECHNOLOGIES-97628/news…

Kurs bei $ 0.206, ein + von 228.96 % auf google

ALLEN weiterhin viel ERFOLG

-----------
So wie einem das Licht nicht ohne die Dunkelheit bewusst würde, so gibt es keine Situation, in der nicht etwas POSITIVES zu entdecken wäre.

Frei nach I Ging

18.07.13 00:20

30 Postings, 4128 Tage BodoBastlerverkauft

Doch ich hab heute morgen alles verkauft gehabt^^ nun hab ich den schlamassel  

18.07.13 02:10

151 Postings, 4068 Tage LQMTendlich!

YES endlich .... ich hoffe die ZUKUNFT vom LQMT beginnt endlich!

Hoffentlich wird endlich Geld verdient!

10 Jahre an der Arbeit sollte belohnt werden...

NOCH ist LQMT immer noch günstig zu bekommen...

ich glaube an LQMT !

 

18.07.13 13:17

1 Posting, 3906 Tage Andrikoszu spät?

Habe leider vor ca 2 Monaten nicht dran geglaubt und bin draußen geblieben.... :-( 

Lohnt es sich denn noch heute einzusteigen?! Was meint ihr?!

 

18.07.13 15:14

4792 Postings, 8233 Tage GilbertusLQMT

Gerüchte um iPhone mit Liquidmetal, ich denke in ca. 2-4 Jahren, vorher mit "Liquidmetall-Einzelteilen" aber sehr gut möglich;

http://www.smallcapnetwork.com/Liquidmetal-Technologies-Inc-…

Liquidmetall iWatch ist aber auch gut möglich, das wäre für uns schon mal der "Renner"

Aber Vorsicht, möglich dass der Kurs Heute nochmals auch etwas zurück läuft.

In USA vorbörslich bei 0.15 $, Minus 25.74 % tongue out



Fortuna allen hier :):cool::rolleyes:;)

-----------
So wie einem das Licht nicht ohne die Dunkelheit bewusst würde, so gibt es keine Situation, in der nicht etwas POSITIVES zu entdecken wäre.

Frei nach I Ging

18.07.13 17:30

1243 Postings, 4400 Tage onkel james...erholt sich aber ganz schön,

nicht das wir nacher noch ins Plus laufen!  

19.07.13 19:54

4792 Postings, 8233 Tage GilbertusApple's iPhone der Zukunft mit Liquidmetal Tech.

1.  Bei LQMT muss man sich bewusst sein, dass es sich zwar um einen Penny-Stock handelt, der aber technologisch Pionier-Leistung vollbringt & noch eine enormes Kurs-Potential in sich hat, darum auch diese extremen Ausschläge wie die letzten 3 Tage. Gestern z.B. ca. 116 Mio. Shares gehandelt, wo durchschnittlich  4,7 Mio üblich sind, nicht ganz die Hälfte aller LQMT-Shares wurden gehandelt.

2009  Kurs    bei   1.00 $

2003  Kurs    bei   6.00 $

2002  Kurs    bei  20.00 $

2.  Ich halte es für möglich, dass der Kurs mit einem Plus von 223 % an einem Tag doch zu schnell hochgelaufen ist, sodass er am Zweiten Tag um ca. 40 % wieder fallen musste, damit   gewissen, völlig überraschte Finanz-Kreise auch noch auf den bereits volle Fahrt aufgenommenen LQMT-Zug halt noch aufspringen konnten. Heute bei Halbzeit der Börsen-Oeffnungszeit sind 28 Mio. Shares gehandelt, bei einem Plus von 17.6 % aktuell. Der Kurs stabilisiert sich also auf rund dem 3-fachen von vor 3 Tagen, was doch recht beachtlich, aber für uns Aktionäre recht positiv ist. Wenn ich bei Apple etwas zu sagen hätte, würde ich so schnell wie möglich ein iPhone mit einem Liquidmetal-Gehäuse, welches unzerkratzbar hart ist, fertigen. Ich selber habe dieses LQMT-iPhone ja schon letztes Jahr erwartet, aber offenbar verzögert sich das Ganze, aus mir unerfindlichen Gründen. Auch eine iWatch-LQMT wäre ideal und vorstellbar, hat sich doch auch "Swatch" für ihre Uhren ein Patent bei LQMT gesichert.

3.  Apple hat sicher nicht für "die Katze" 2010 20 Mio. $ an LQMT bezahlt, später das Patent nochmals um 2 Jahre verlängert, um nichts daraus zu machen.  Ein Anal-yst meinte zwar, Apple könne das Patent auch nur gekauft haben, um es quasi der Konkurrenz vor der Nase weg aus dem Verkehr zu ziehen, sellber gar nichts damit vorhabe.  Ich meine jedoch, wenn Apple schon 20 Mio.  hinblättert, dann nur, weil die Verantwortlichen dieses Liquidmetal, mehrfach härter als Stahl,  für ihre iPhone Gehäuse in einem Guss als äusserst ideal einstuften.  Auch Apple gibt nicht einfach so 20 Mio. $ aus für nichts und wieder nichts, das wäre ja nonsens, auch wenn sie dies aus der "Portokasse" bezahlen.

4.  Jedenfalls habe ich nochmals 90'000 Shares nachgelegt, langsfristig gebunkert, und dann schaun mer mal, was da so Schönes auf uns zukommt aus dem Innovations-Hause Apple. Irgendwie müssen sie sich die die Plastic-Konkurrenz (Samsung) ja wieder vom "Hals" halten, diese qualitativ blamieren undresp. bei den eigenen Kunden durch super Qualität punkten.

In den USA momentan bei 0.137 $, ein + von 14.26 %.

5.  Allerdings besteht natürlich auch ein Risiko bei diesem Titel, weil wenn jetzt keine merklichen Einkommen generiert werden, hat die Firma nach ca. 2 Jahren kein Cash mehr. Darum ist der Kooperations-Vertrag über Vertrieb/Verkauf ja auch so wichtig, damit das Produkt jetzt auch verkauft wird. Apple scheint aber kaum nur aus Nächstenliebe LQMT schon einmal mit CASH ausgeholfen zu haben, ich bin überzeugt, die würden es wieder tun, eben weil Apple das Produkt auch einsetzen will, damit sie die ihr hart auf den Leib gerückte, lästige Konkurrenz,  auch damit wieder distanzieren kann. Die Gerüchteküche Apple & Liquidmetal Technologie brodelt jedenfalls schon wieder heftig, und wor Rauch ist, ist bekanntlich auch Feuer.

http://www.smallcapnetwork.com/Liquidmetal-Technologies-Inc-LQMT-The-Liquidmetal-iPhone-Rumors-Are-Back/s/via/3414/article/view/p/mid/1/id/1413/

cool

-----------
So wie einem das Licht nicht ohne die Dunkelheit bewusst würde, so gibt es keine Situation, in der nicht etwas POSITIVES zu entdecken wäre.

Frei nach I Ging

23.07.13 12:32
1

438 Postings, 4125 Tage DieserBerndOb an der Meldung

über eine Produktionsleistung von 6.000 km LQM pro Produktionsapparat in 10-15 Jahren was dran ist und es eine großserientaugliche Produktion geben wird?

 

23.07.13 15:27
1

6084 Postings, 4510 Tage DA_BUAAuf gehts 0,2!

24.07.13 09:46
1

438 Postings, 4125 Tage DieserBerndAuf gehts 0,1!

Seite: 1 | 2 |
| 4 | 5 | 6 | 7 | 8 | 9 | ... | 23   
   Antwort einfügen - nach oben